KTM Duke 390 specifications and details revealed

KTM has unveiled the specifications and details of it’s new upcoming product KTM Duke 390. KTM is now ready to continue it’s legacy of being one of the biggest manufacturer of sports motorcycle from Austria with such an powerful and stylish enhancements.

KTM Duke 390 is boasts up with a 4-stroke Single Cylinder Engine, a fully electronic ignition system (Controlled) with digital ignition timing adjustment system delivering tremendous output of 44 HP (32 kw). KTM Duke 390 is equipped with tremendous technical specification that could be desirable in any sport motorcycle. Dealing with its cubic capacity it carries a displacement of 373.2 cm³ and bore(the size of the piston) is set at 89mm , stroke 60 mm. KTM Duke 390 specifies transmission of 6-speed, claw shifted delivering the primary gear ratio at 30:80 and the secondary gear ratio at 14:45. Dealing with it’s Cooling system it is dubbed with Liquid cooling system, continuous circulation of cooling liquid with water pump. KTM Duke 390 features an astonishing Brake system the front disc brake-system is a four-pot brake caliper and the rear disc brake-system is one-pot brake caliper with floating brake discs, the front disc features a 300mm diameter whereas the rear disc is 230mm in diameter.

KTM Duke 390 has 11.1 litre of fuel tank capacity. KTM Duke 390 has 139 kg in weight approx without the fuel. Rider height is maintained at 800mm with a ground clearance of 170 mm. However, the price of the KTM Duke 390 has not enclosed yet.

Since Bajaj will be sharing most of the component, chances are that it will not be too costly and can be priced below Rs. 2 lakhs.

But if this bikes comes to India then will certainly pave ways for higher capacity bikes in India. Chances are that it will redefine power bikes segment in India.

Leave a Reply

Your email address will not be published. Required fields are marked *